Can I Use A 5amp Fuse In A 10 Amp Plug?

Can I replace a 10amp fuse with a 13 amp?

If you replaced it with 13A fuse, it will allow current more than 10A, so it may possible that other components may get damage due excessive current flow than specified.

If TV components can sustain up to 13 A current, you can replace it.

You can put a smaller fuse in with the same “speed” rating..

How much current can a 13 amp fuse take?

BS 1362 Fuse Operation Characteristics In fact a 13A fuse will allow a current of 20A to pass indefinitely without blowing.

What happens if I put a 20 amp fuse in a 15 amp slot?

The 15 amp slot is designed for handling current upto 15 amps so if you put a 20 amp fuse in a 15 amp slot and draw a current greater than 15 amps there will be heating and other issues like molten insulation you can put a 20 amp fuse only if u know that u are not going to draw more than 15 amps.

Can I put a 3 amp fuse in a 10 amp plug?

The 13A fuse in place of a 10A fuse wouldn’t directly cause any problem – but then, if there’s a problem with the appliance you’re using, or if you plug in too many things and the current goes over 10A but under 13A, then under the new fuse the extension lead will keep working whereas the old fuse would have blown.

What happens if you use the wrong amp fuse?

Fuses are present to protect the components of the electrical system. Rather than destroying the circuit when there is a surge of power, the fuse blows to protect it. … If you use a fuse with the wrong amperage, the fuse won’t blow as intended, damaging the circuit and resulting in a much larger repair bill.

Can you put a 20 amp fuse in a 10 amp?

A 10 Amp fuse would have been rated to prevent more than 10 Amps flowing in the cable that is used in the circuit. … Dimwits who replace 10 Amp fuses with 20 Amp fuses.

Can I use a 3amp fuse with 5 amp?

If so, yes, you can replace a 3A fuse with a 5A fuse. But consider this. A 3A fuse was used for a reason.

Is it OK to use higher amp fuse?

In general, NO. Replacing a fuse with a higher-amp fuse is a very bad idea and can lead to fires. Fuses (and circuit breakers) are rated such that they blow or trip before any part of the circuit gets to a dangerous current. … Fix the underlying problem, and you won’t have any more blown fuses.

Can I use a 5 amp fuse instead of a 3 amp fuse?

If you replace it with a 5A fuse you will lose part of the protection the 3A fuse was intended to provide. In case of a failure of the device the fuse is suppose to protect, the result of using a larger fuse could be to damage the device to the extent that it could not be repaired. It could also start a fire.

Can I replace a 5amp fuse with a 13 amp?

A 13 will be ok in a 5amp device as long as its ok and your going to get the correct ampage soon. Not a good idea at all, if there is a fault with them you risk a shock or a fire.

What amp fuse do I need for LED lights?

75mm is good for about 7.5 amps max. I generally like to have at least 100% extra rating so a 3 amp fuse max is what i would use. This should be plenty for 4 leds. If you have working leds but blow a 10A fuse i think your wiring needs checking and you will probably find your fuse is directly across the battery.

Can you put a 13amp fuse in a 3 amp plug?

BS1363 has standardised on just two preferred fuse ratings, 3A and 13A, however any fuse rating up to 13A can still be used.

How many watts can a 5 amp fuse take?

Fuse ratings45 AMPFor circuits of more than 13kw (13000 w)13 AMPFor appliances between 700 and 3000w (3kw)5 AMPFor lighting circuits. The maximum permissible load of a lighting circuit is 1200w or 12* 100 watt lamps3 AMPFor appliances up to 700 watts, such as table lamps and alarm clocks3 more rows

Can I use a 2 amp fuse instead of 1 amp?

The real answer is NO. The manufacture put a 1 amp fuse in the unit because the typical draw is much less than the 1 amp and the fuse blow will be an indication of trouble coming.

How can you tell if a plug fuse is blown?

Remove the fuse from its holder. In some cases you may need a small screwdriver to unscrew the fuse holder cap. Look at the fuse wire. If there is a visible gap in the wire or a dark or metallic smear inside the glass then the fuse is blown and needs to be replaced.

What FUSE do I need for 12v?

There are 3 types of 12v fuses I recommend. They are Spade Fuses, ANL fuses, and Re-settable Breakers. Spade fuses are the fuses that you’ll commonly find in your car’s fuse panel and are typically for items run out of your distribution block and less than 30 amps (in our case.

Why does my 15 amp fuse keep blowing?

Having too many devices plugged into a circuit is the most common cause of fuses blowing. … Another potential cause of fuses blowing is a short circuit. When a hot wire touches either the grounding pathway or a neutral wire, it results in the circuit shorting out.

What amp fuse do I need for an extension lead?

13A fuse1.5 3 core will be ok and you should use a 13A fuse for an extension.

What appliances use a 5 amp fuse?

Domestic Appliances Fuse Ratings Coffee maker – 5 amp. Dishwasher – 13 amp. DVD player – 3 amp. Electric blanket – 3 amp.

What amp fuse do I need?

Plugs for appliances rated between about 700 watts and 3000 watts (the maximum rating of a wall socket) should be fitted with a 13-amp fuse (coloured brown). For example: 13A Fuse – Washing machine, dishwasher, microwave, kettle, toaster, iron.