Can you spur a double socket off a single socket?
You can double your socket power in a weekend just by swapping your single outlets for doubles.
If you are wondering whether you can swap any single socket for a double, then the answer is yes, providing the existing socket is the only one on that spur (wire feed) from the ring main..
Do I need a fused spur for an extractor fan?
The fan also requires a local means of switching off for mechanical maintenance (537.3. … 2.5) and, therefore, a standard switch fused spur should suffice, unless there is a permanent live also required; in which case the switch will need to be double-pole.
Do kitchen appliances need fused spurs?
1 – fused spurs are not required, most appliances just plug in. Isolation is achieved by removing the plug from the socket. Cookers and some ovens will require their own circuit.
Can I use a plug instead of a fused spur?
you want a single socket in the place of the fused spur. and then simply wire the new plug socket into the ring. Leaving two wire sets the back of the new plug.
Is it OK to spur off a socket?
The easiest way of connecting into a ring circuit is to run a spur cable from the terminals of an existing socket – but you can’t connect it to any socket. … You mustn’t run a spur from a socket that’s already on a spur, or that already supplies a spur.
How many sockets can be on a spur?
you can have maximum one double socket as a normal spur but if you are going from socket to FCU fused at 13 amp from there you can add as many sockets as you wish as all the sockets and cable will be protected by the fuse so no chance of overloading the cable the fuse will blow first.
What is a spur outlet?
A fused spur is an electrical supply accessory that incorporates a fuse. This fuse, with a lower rating than the fuse for a ring man, allows an electrical supply using one feed cable to a socket to be taken off a ring main. … Switched fused spurs include a manual on/off switch, while unswitched fused spurs do not.
Can I spur a double socket off a single?
3 Answers from MyBuilder Electricians A non-fused spur can only feed 1 double or single socket outlet or one permanently connected item of electrical equipment.