What Happens If You Use A Higher Amp Fuse?

Does it matter what amp fuse you use?

As a rule of thumb, fuses are rated according to the power rating of the appliance.

Plugs for appliances rated up to about 700 watts should have a 3-amp fuse (coloured red)..

Can I use a 3 amp fuse instead of a 2.5 amp?

Yup. The fuse is there to protect the wiring and 3 amp is well within the supply wire’s capability. Re: Radio calls for a 2.5 amp fuse.

Can I use a 30 amp fuse instead of 15?

You MAY be ok with a 30amp in place of the normal 15, but you MAY also burn up some wireing, and/or the whole bike. In any case the work done needs a good going over.

Is it OK to use a higher amp fuse in a car?

Never replace a blown fuse with a higher-amp fuse. Always replace the fuse with one with the specified amp rating. You may install the next-smaller-rated fuse to get you by in a pinch until you can purchase a replacement.

How do I know if my outlets are 15 or 20 amp?

Look at your outlet. If the two slots are parallel, it is a 15 amp outlet. If one slot is ‘T’ shaped and the other is straight, it is a 20 amp outlet that will also accept 15 amp plugs. If the two slots are perpendicular the outlet is 20 amp only.

What happens if you put a 13amp fuse in a 10 amp plug?

The 13A fuse in place of a 10A fuse wouldn’t directly cause any problem – but then, if there’s a problem with the appliance you’re using, or if you plug in too many things and the current goes over 10A but under 13A, then under the new fuse the extension lead will keep working whereas the old fuse would have blown.

What happens if I use a bigger fuse in my car?

If you replace a fuse with a higher amp one it will work but create an unsafe circuit. It could cause a failure of the device burn it up, start a fire. The fuse is designed as a safety device. It should not only be the correct amperage but also the correct voltage and fast or slow blow.

Can I put a 10amp fuse in a 5 amp?

Possibly yes. What ever is wired into that 5 amp slot is rated for a max of 5 amps, overdrawing more than 5 amps by removing the 5 amp fuse and putting in a 10 amp fuse can possibly short out a circuit.

Can I replace a 10amp fuse with a 13 amp fuse?

If you replaced it with 13A fuse, it will allow current more than 10A, so it may possible that other components may get damage due excessive current flow than specified. If TV components can sustain up to 13 A current, you can replace it. … You can put a smaller fuse in with the same “speed” rating.

Can I use a 10 amp fuse instead of 15?

You can, it will may immediately blow, but it won’t hurt anything other than the fuse. … What you don’t want to do is use a higher amp fuse or something like a jumper wire. That could damage the wiring and start a fire.

How many watts can a 30 amp fuse handle?

A 30-amp outlet supplies 3,600 watts (30 amps multiplied by 120 volts). Therefore, the breaker on that outlet could meet code and still trip anywhere between a total load of 2,880 watts (80 percent of 3,600 watts) and 4,320 watts (120 percent of 3,600 watts).

Is it OK to replace a 3amp fuse with a 5 amp fuse?

If the motor is increased to a 5 amp motor then a 5 amp fuse is ok. You could but you will risk damaging the device it is suppose to protect. Replace with the correct size fuse, if you are having a blown fuse problem you may have a short in the system. … If there is a short either will blow.

Is it OK to use a lower amp fuse?

Replacing a fuse with a lower value one, however, is not unsafe but may cause problems if the load current is higher than the fuse value. It is thus generally recommended to replace it with a fuse of the same value. However, in some cases, it is probably okay to use a fuse with a lower value.

Can I replace a fuse with a higher amp?

In general, NO. Replacing a fuse with a higher-amp fuse is a very bad idea and can lead to fires. Fuses (and circuit breakers) are rated such that they blow or trip before any part of the circuit gets to a dangerous current. … Fix the underlying problem, and you won’t have any more blown fuses.

How can you tell if a 13a fuse is blown?

Look at the fuse wire. If there is a visible gap in the wire or a dark or metallic smear inside the glass then the fuse is blown and needs to be replaced.

What happens if a fuse is too small?

The capacity of the fuse should always be higher than the amperage level of the object or device the fuse is assigned to protect. If a fuse is too low for the circuit that it is intended to maintain, that is more than enough reason for it to blow unexpectedly. … A blown fuse can also be caused by a power surge.

What happens if you use the wrong amp fuse?

Fuses are present to protect the components of the electrical system. Rather than destroying the circuit when there is a surge of power, the fuse blows to protect it. … If you use a fuse with the wrong amperage, the fuse won’t blow as intended, damaging the circuit and resulting in a much larger repair bill.

Can I put a 20 amp fuse in a 15 amp slot?

The 15 amp slot is designed for handling current upto 15 amps so if you put a 20 amp fuse in a 15 amp slot and draw a current greater than 15 amps there will be heating and other issues like molten insulation you can put a 20 amp fuse only if u know that u are not going to draw more than 15 amps.

Can I put a 30 amp fuse in a 20 amp slot?

If nothing goes wrong in the circuit, a 20A, 30A, or 50A fuse won’t matter. If something does go wrong, the larger fuse could allow dangerous overheating, and as pointed out, could allow a fire to start.

Why does my 15 amp fuse keep blowing?

Having too many devices plugged into a circuit is the most common cause of fuses blowing. … Another potential cause of fuses blowing is a short circuit. When a hot wire touches either the grounding pathway or a neutral wire, it results in the circuit shorting out.